How To Apply MasterProtect® HB 400 Coating

Watch how to apply MasterProtect HB 400 water-based, high-build, 100% acrylic, waterproof coating (Video Transcript). Then learn more about the materials, tools and accessories required to do the job safely and efficiently.

MasterProtect HB 400 Coating Application Video Transcript

• How To Apply MasterProtect HB 400 Coating
• Ensure substrate is structurally sound, fully cured, dry and clean
• Mix thoroughly before applying. Apply by brush, roller or sprayer.
• Apply coating using an ‘N’ pattern
• Cross-roll through coating to ensure uniform wet mil thickness
• Check wet film thickness to ensure application at specified rate
• Back-roll in same direction to create a uniform appearance
• Refer to the MasterProtect HB 400 technical data guide for more information.

Coating Application Materials, Tools and Accessories

Materials, Tools and Accessories – Shown

• Protective Gloves – 4-mil nitrile, disposable glove
• Protective Clothing – Long-sleeve sweatshirt
• MasterProtect HB 400 Coating – For above-grade concrete, masonry, stucco, and EIFS
• Low Speed Drill
• Coating Mixing Paddle – Double ribbon agitator
• Roller – Adjustable handle and 3/4 – 1 1/4 inch nap roller cover
• Wet Film Thickness Gauge/Comb.

Precautionary Accessories – Not Shown

Refer to the MasterProtect HB 400 Safety Data Sheet (SDS) for more information.

• Eye Protection
• Face Protection
• Respiratory Protection – In case of inadequate ventilation.

Citations

• Master Builders Solutions – MasterProtect HB 400 Coating
• Atlas Supply – Master Builders Solutions
• Atlas Supply – Coatings, Sealers & Corrosion Inhibitors
• Atlas Supply – Tapes, Tools and Accessories.