MasterEmaco P 124 Steel Reinforcement Primer & Bonding Agent packaged in a 6-gallon kit
Watch how to apply MasterEmaco P 124 steel reinforcement primer and bonding agent (Video Transcript). Then learn more about the materials, tools and accessories required to do the job safely and efficiently.
MasterEmaco P 124 Primer Application Video Transcript
Concrete must be structurally sound and fully cured
Remove all oxidation and scale from the exposed reinforcing steel in accordance with Technical Guide No. 310.1R
Surface to be repaired must be saturated-surface dry (SSD) prior to the application of MasterEmaco P124, when used as a bonding agent with ICRI Technical Guide No. 310.1R
Precondition all components to 70 degrees Fahrenheit (21 degrees Celsius)
Pour contents of Part A and Part B into a clean mixing bucket
Blend the components for 2 minutes
Slowly add all of Part C. Use the appropriate drill paddle to thoroughly mix the components.
Apply MasterEmaco P 124 using a stiff brush or broom
Work the bonding agent thoroughly into the substrate
When applying to rebar, two coats of 10 mils (0.25 mm) are required
Protect the bonding agent from direct sunlight and temperature above 95 degrees Fahrenheit (35 degrees Celsius)
Refer to the MasterEmaco P 124 technical data guide for more information.
Primer Application Materials, Tools and Accessories