Specialty MRO - Specialty Fluids , Compounds & Lubricants
Specialty/Industrial Fluids, Compounds & Lubricants
Atlas Supply is your Northwest supplier of high performance
specialty fluids, compounds and lubricating products designed for plant
and building maintenance, equipment maintenance and Industrial Assembly.
Look at Atlas Supply for release coatings, electrical insulating compounds,
release compounds, valve lubricants, high vacuum greases, HVAC compounds,
heat sinks compounds, extreme low and high bearing greases, o-ring lubricants,
chemical resistant greases, chain and open gear lube, Molykote synthetic
greases, anti-seize pastes, dry film lubricants, woodworking lubricants,
Loctite, super lube lightweight oils and more.
Specialty Industrial Fluids, Compounds & Lubricants
Molykote Lubricants –
Molykote mineral and synthetic blend hydraulic
oils that minimize formation of emulsions in contact with water due to
the purity of the base fluid. They will generally perform successfully
in hydraulic systems far longer than conventional hydraulic oils. Plants
can gain significant savings from reduced oil consumption, reduced disposal
cost, labor savings and fewer interruptions to production. These non-toxic
oils are derived from hydrocracked or synthetic base stocks and can be
used in systems designed for low pour point or high flash point mineral
oils. You will find a complete selection of Molykote
compressor and pump fluids to choose from. These specialty fluids are
formulated to meet or exceed the performance of all comparable OEM fill
products. Molykote gearbox and chain lubricants
offer greater resistance to oxidation and provide stable performance at
high temperatures and under high loads. For multi-purpose oils, there
are Molykote lubricants for a wide range
of moving components in industrial systems. Note: Molykote
lubricating fluids conform to USDA listing requirements under H-1 or H-2
designations and many are kosher approved. Call your Atlas Supply product
specialist for details.
Specialty lubricants from Dow Corning
– High-performance specialty lubricants that help reduce friction
and wear, extend lubrication time and reduce maintenance and replacement
costs in applications that would defeat conventional oils and greases.
Formulated to withstand the rigors of heavy loads, dirty, dusty or chemically
harsh environments, temperature and speed extremes, lubricants from Dow
Corning are also ideal for normal service lubrication as well.
There are five classes of specialized lubricants from which
to choose. Each class has a different physical form with properties that
make it suitable for specific applications:
| |
Compounds – Grease-like
materials composed of silicone fluids and silica fillers. Used for
their sealing, dielectric, non-metal-to-metal lubricating and release
properties. |
| |
Greases – Solid
to semisolid materials consisting of a lubricating fluid, thickening
agent and additives. Used on rolling element bearings and other moving
parts. |
| |
Pastes – Grease-like
materials containing a very high percentage of solid lubricants. Used
for assembly and lubrication of highly loaded, slow moving parts.
|
| |
Anti-Friction Coatings
– "Lubricating Paints", when applied, these materials
cure to form dry, solid lubricant coatings that are bonded to the
surface. |
| |
Dispersions – Finely
divided solid lubricants suspended in lubricating fluids; preferred
when it is necessary to apply solid lubricants in liquid form. |
There is a wide variety of typical applications for fluids,
compounds, and lubricants:
| |
Specialized Lubricants
– Rolling Element Bearings; Valves, Packings, Seals & O-Rings;
Chain Drives; Threaded Connections; Power Screw Drives; Control Cables;
Slides, Guides & Tracks; Gears; Plain Bearings, Bushings &
Sleeves. |
| |
Compounds – Electrical
Insulating; Release Compounds; Valve Lubricant-Sealant; High Performance
Lubricant-Sealant; High Vacuum Grease; Dielectric Compound for High-Current
Switches; HVIC Compound; Heat Sink Compound. |
| |
Greases – Multi-Purpose
Metal-to-Metal; White E.P. Bearing Grease; Multi-Purpose Synthetic
Grease for Moderate Loads at High Speeds (especially for food-contact
applications); Extreme Pressure Synthetic Grease; High Performance
Synthetic Grease (high speed, high loads and high temperature combinations);
Chain and Open Gear Lube; Extreme Low Temperature Bearing Grease;
High Temperature Bearing Grease; Extreme High Temperature Bearing
Grease; O-Ring Lubricant; Long Life Bearing Grease; Chemical Resistant
Bearing Grease; Chemical Resistant Valve Lubricant. |
| |
Pastes – High Temperature
Anti-Seize Paste; Ultrapure High Temperature Paste; General Purpose
White Paste; G-n Metal Assembly Paste/Spray; Part Assembly Paste;
321 Dry Film Lubricant. |
| |
Anti-Friction Coatings
– Dry Film Lubricant (will not attract contaminants); Bonded
Lubricant (water dilutable); Bonded Lubricant (high load-carrying
capacity); Corrosion Protection Coating. |
| |
Dispersions – Dry
Film Lubricant (for sliding contacts with aluminum and stainless);
High Temperature Chain Lubricant; M Gear Oil Additive (reducing friction
and lowering operating temperature in gearboxes); Pene-Lube Multi-purpose
Penetrating Lubricant for Loosening Rusted Parts; Moly Pene-Lube (for
improved disassembly and load handling); silicone Lubricant; silicone
Release Spray; Metal Protective Coating (extremely resistant to corrosive
or salty environments) Moly-Powder. |
| |
Fluids – Low-Temperature
Lubrication; High-Temperature Lubrication; Heat Transfer Fluid; Lubricating
in Harsh Environments; Release Agent for Plastics, Glues and other
Elastomeric Products. |
Plastic Tooling/Moldmaking
Moldmaking Materials & Plastic Tooling Systems
Atlas Supply is your Northwest supplier of moldmaking and
plastic tooling systems consisting of epoxy, urethane and silicone surface
coats; laminating, casting and moldmaking materials; modeling, metal forming
and production fixture boards.
Dow Corning silicone Moldmaking Materials
– Easy to use in a variety of products for reproducing figurines,
collectibles, jewelry, candles, and artifacts; to molding of prototypes,
industrial tooling, and furniture; creating silicone rubber pads for transfer
printing and robotics skins for animated creatures; to architectural fabrication.
Ren® Tooling Resin Systems by
Huntsman – Special epoxies and polyurethanes with a broad
range of physical and performance properties for tooling applications.
Products include aluminum fillers, thickeners, room temperature and heat
resistant surface coats, laminating systems, casting materials and room-temperature
pastes.
Parts-in-Minutes® Polyurethanes
by Huntsman – Polyurethanes for rapid prototyping and short
part runs are low-viscosity systems designed for use with automated dispensing
equipment and low cost tooling. With their extremely fast gel times, these
materials permit de-molding of durable parts in as little as 15 to 30
minutes.
Pro-Cast® Polyurethanes by Huntsman
– These fast setting polyurethanes are designed for casting durable
tools and prototype parts. The polyurethanes are easy to mix and pour;
gel in less than 10 minutes and can be de-molded in as little as 30 minutes.
Mold and parts from these materials exhibit low shrinkage, excellent reproduction
of detail and good abrasion resistance.
Ren:C:O-Thane® Polyurethanes
and Polyureas by Huntsman – These systems are diverse, easy-to-handle
materials that can be used for applications ranging from prototypes and
parts, such as impellers, rollers and gears, to flexible mold, foundry
patterns and core boxes. These materials feature a range of hardness levels,
from an extremely soft, Shore 10A to a very hard, Shore 90D. Many systems
exhibit outstanding tear strength, while others feature excellent toughness
and resistance to impact and abrasion.
Polyboard™ Molding Boards by
Huntsman – Material used by toolmakers, pattern shops and
design engineers to CNC machine dimensionally stable, close tolerance
models, patterns and tools. These are grain-free materials featuring high-quality
surface finish and excellent edge definition, excellent machinability,
low coefficient of thermal expansion and good resistance to moisture absorption.
Ren Shape™ Boards by Huntsman
– New generation boards designed for building styling models,
fixturing and duplicating aids, and foundry patterns as well as metal-forming
dies, vacuum- forming molds, and nickel electroforming mandrels. These
products share a number of performance characteristics including ease
of machining, excellent dimensional stability, good edge definition and
low dust generation for easy cleanup.
Devcon & Permatex Compounds
– Castable, non-shrinking compounds used for making rugged, flexible
molds, forming dies, cast parts and non-scratching holding fixtures as
well as abrasion-and noise-resistant linings and encapsulating parts.
Includes a silicone-type liquid release agent that prevents epoxy and
urethane compounds from sticking to patterns or mold surfaces and assures
easy release.
Rubber
Rubber Products and Custom Rubber Fabrication
You can be confident you are working with one of the most
experienced companies in the field of rubber products and components.
In fact, Atlas Supply was founded in 1917 as Atlas Packing & Rubber
Company. Today, Atlas Supply remains a primary supplier in the Northwest
of custom fabricated strip or die-cut, commercial and mil-spec, rubber
and rubber components. We cut and strip rubber, sponge, Neoprene, Buna-N,
EPDM, pure gum, and silicone materials to your specifications. You will
find setting blocks, bearing pads, custom gasketing and other die-cut
parts available to your specifications.
Sheet Rubber Products and Gasketing
Materials – Neoprene sheet, reduced ply cloth inserted sheet,
diaphragm sheet, white FDA Nitrile sheet, Neoprene cloth inserted sheet,
SBR sheet, butyl sheet, vinyl sheet, military specification sheet and
regular ply cloth inserted sheet.
|
